|
|
|
Cablemed Biotech Co., Ltd.
|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
AM-8000 |
Operation
Safety: Meet the requirements of IEC60601
Weight: 6.0kg
Power: AC110-240V, 50/60 Hz
Consumption: ● 60VA
Battery : built-in, rechargeable
Networking: Connected to central monitoring system
Recorder: Built-in, thermal
Recording: manual, alarm and timing
ECG
Lead: 12 leads (R, L, F, N, C1-C6)
Lead Selection: I; II; III; avR; avL; avF; V1-V6
Waveform: 12 channels
Gain Selection: ≠0. 5; ≠1; ≠2
Electrical Leakage : < 30uA
Baseline Recovery Time: <3 sec following defibrillation
Protection: Withstand 4000V AC/50Hz,
Resistance against defibrillator and electronic knives
Sweep Speed: 12.5mm / 25mm / 50mm /sec
Lead Drop: auto detection
Spo2
Measurement Range : 70-100%
Alarm range: 0-100%
Resolution: 1%
Accuracy: �1% (70-100%)
Pulse rate:
Range: 0-254bpm
Resolution: 1bpm
Accuracy: 2bpm or 2%,
Alarm range:0-254bp
HR
Measurement Range : 0-250bpm
Accuracy: �1bpm or �2%
Resolution: 1bpm
ECG Calibration: 1mV (Peak Value)
ST Segment offset (Diagnose Mode)
Measurement Range : -0.8mV~2.0mV
Accuracy: �0.02mV or �5%
RESP
Model: RA-LL impedance
Measurement /alarm range:0-100rpm
Resolution: 1rpm.
Accuracy: �2rpm.
NIBP
Method: auto oscillometric
Operation Mode: Auto/Manual/continuous
Auto measure interval: selectable
Pulse alarm: 0-254 bpm
Measurement Unit: mmHg/Kpa Selectable
Measurement types: Systolic, Diastolic and Mean
Measurement range:
Adult: 20 ∥ 245mmHg;
Pediatric : 20 ∥ 135mmHg;
Overload protection: Yes
TEMP
Measurement range: 20 ∥ 45→
Resolution: 0.1 →
Accuracy: � 0.2 →
Channel: 2 channels
Average measurement Time: < 10sec
EtCO2
Method: sidestream
Measurement range: EtCO2:0 ∥ 99mmHg
AwRR: 0 ∥ 150rpm
Resolution: EtCO2:1mmHg
Resolution rate: 1rpm
Accuracy: CO2: � 2mmHg(0 ∥ 40 mmHg);
� 5% reading(41 ∥ 26 mmHg);
� 10% reading(77 ∥ 99 mmHg)
respiration rate: � 2 rpm
Alarming range: same as measurement range
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page